Retour au blog
Guides pratiques 2026-11-18 The CEO Creative | Business Office Supplies and Essentials 0 vues

Load and Remove 26/6 Standard Staples Without Jams

Load and Remove 26/6 Standard Staples Without Jams

A practical routine for loading 26/6 standard staples, clearing a staple jam fix, and keeping a 5,000-count bulk box stocked without guesswork.

Start with the staple size, not the stapler color

Most staple jams begin before the staple ever touches paper. The 26/6 label describes a standard staple size, and it only works smoothly in a stapler built to accept that size. If you are unsure what your stapler takes, check its manual or the channel where the staples sit before you buy a bulk box.

The 5000 Ct. Standard (26/6) Staples from The CEO Creative are supplied as a bulk pack of standard 26/6 staples. The catalog describes them as suitable for common staplers that accept 26/6 staples, so the first checkpoint is simple: confirm your stapler accepts 26/6, then load a fresh strip.

What the 5000-count box actually gives you

  • 5000 Ct. Standard (26/6) Staples: Includes 5,000 standard 26/6 size staples in a convenient bulk pack. A large supply reduces how often you open the stapler to reload, which also reduces the chance of bending a strip during handling.
    5000 Ct. Standard (26/6) Staples
    5000 Ct. Standard (26/6) Staples
  • 5000 Ct. Standard (26/6) Staples: Suitable for common staplers that accept 26/6 staples. This is the key compatibility check before loading; the box is not described as fitting every stapler.

How to load standard staples without bending the strip

The supplied product information does not include a manufacturer loading procedure, so use the steps below as general handling guidance and follow your stapler's own instructions where they differ.

  1. Open the stapler the way its design intends: Most staplers open at a hinge or a rear latch. Do not force a closed body open; check the stapler's manual if the opening point is not obvious.
  2. Check the channel for old staples: Remove any partial strip or loose staple before adding a new one. Leftover fragments are a common reason a fresh strip sits unevenly.
  3. Keep the strip flat and aligned: Hold the 26/6 strip by its edges and lower it into the channel in the direction the stapler expects. Bending the strip sideways is what usually causes a misfeed.
  4. Close the stapler fully before stapling: A latch that is not fully closed can make the first staple fire at an angle. Press until the stapler clicks or seats.
  5. Test on scrap paper: Fire one staple into a scrap sheet before stapling a document. If it sits flat, the strip is loaded correctly.

A staple jam fix that starts with the least force

When a staple jams, the goal is to remove the deformed staple without bending the stapler's channel. Work with the stapler open and unloaded.

  • Open the stapler and remove the strip: Take out the remaining 26/6 staples so you can see the jammed staple clearly.
  • Lift the jammed staple with pliers or a staple remover: Grip the bent staple and pull it straight out. Avoid prying against the channel walls.
  • Inspect the channel for fragments: A small piece of a broken staple can cause the next jam. Remove any loose metal before reloading.
  • Reload a flat strip and test again: If the stapler jams a second time on a fresh strip, stop and check the stapler's manual rather than forcing more staples through.

When 26/6 is the right standard stapler staple

Standard stapler staples are not universal. Use this quick comparison to decide whether the 26/6 box fits your desk setup.

  • Everyday paper fastening: The 5000 Ct. Standard (26/6) Staples are described for routine paper fastening and general office use, which matches typical desk stapling.
  • Home office and workspace restocking: A 5,000-count bulk pack suits a desk, home office, or shared workspace where staples are used regularly.
  • Staplers that do not accept 26/6: Do not load these staples into a stapler specified for a different size. The supplied information only confirms suitability for common staplers that accept 26/6 staples.

Keeping a 5,000-count box tidy between refills

Bulk staples stay usable when they stay flat. Keep the box closed and store it away from damp surfaces, because bent or rusted strips are more likely to jam. The catalog describes the pack as a way to keep your supply stocked, so treat it as a reserve rather than a loose pile on the desk.

The catalog does not specify a staple capacity per stapler or a maximum sheet count, so do not assume the 26/6 size guarantees a particular sheet capacity. Check your stapler's own rating for that.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil